Dataset
ESA Snow Climate Change Initiative (Snow_cci): Daily global Snow Cover Fraction - snow on ground (SCFG) from AVHRR (1982 - 2019), version1.0
Abstract
This dataset contains Daily Snow Cover Fraction (snow on ground) from AVHRR, produced by the Snow project of the ESA Climate Change Initiative programme.
Snow cover fraction on ground (SCFG) indicates the area of snow observed from space over land surfaces, in forested areas corrected for the transmissivity of the forest canopy. The SCFG is given in percentage (%) per pixel.
The global SCFG product is available at about 5 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included.
The SCFG time series provides daily products for the period 1982-2019.
The product is based on medium resolution optical satellite data from the Advanced Very High Resolution Radiometer (AVHRR). Clouds are masked using the Cloud CCI cloud v3.0 mask product.
The retrieval method of the snow_cci SCFG product from AVHRR data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module. All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 630 nm and 1.61 µm (channel 3a or the reflective part of channel 3b), and an emissive band centred at about 10.8 µm. The snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFG retrieval method is applied.
The following auxiliary data sets are used for product generation: i) ESA CCI Land Cover from 2000; water bodies and permanent snow and ice areas are masked based on this dataset. Both classes were separately aggregated to the pixel spacing of the SCF product. Water areas are masked if more than 50 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map; ii) Forest canopy transmissivity map; this layer is based on the tree cover classes of the ESA CCI Land Cover 2000 data set and the tree cover density map from Landsat data for the year 2000 (Hansen et al., Science, 2013, DOI: 10.1126/science.1244693). This layer is used to apply a forest canopy correction and estimate in forested areas the fractional snow cover on ground.
The SCFG product is aimed to serve the needs of users working in cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology, and biology.
The Remote Sensing Research Group of the University of Bern is responsible for the SCFG product development and generation. ENVEO developed and prepared all auxiliary data sets used for the product generation.
The SCFG AVHRR product comprises one longer data gap of 92 between November 1994 and January 1995, and 16 individual daily gaps, resulting in a 99% data coverage over the entire study period of 38 years.
Details
Previous Info: |
No news update for this record
|
---|---|
Previously used record identifiers: |
No related previous identifiers.
|
Access rules: |
Public data: access to these data is available to both registered and non-registered users.
Use of these data is covered by the following licence(s): https://artefacts.ceda.ac.uk/licences/specific_licences/esacci_snow_terms_and_conditions.pdf When using these data you must cite them correctly using the citation given on the CEDA Data Catalogue record. |
Data lineage: |
The snow_cci SCFG product based on AVHRR was developed and processed at the University of Bern in the frame of ESA CCI+ Snow project. The AVHRR baseline FCDR was pre-processed using pyGAC and pySTAT in the frame of the ESA CCI Cloud project (Devasthale et al. 2017, Stengel et al. 2020). Data were produced by the project team and supplied for archiving at the Centre for Environmental Data Analysis (CEDA). |
Data Quality: |
The unbiased root mean square error per-pixel is added as an uncertainty layer in the product. The AVHRR based SCFG product matches the CCI data standards version 2.2, released in May 2020.
|
File Format: |
Data are netCDF formatted
|
Related Documents
Citations: 2
The following citations have been automatically harvested from external sources associated with this resource where DOI tracking is possible. As such some citations may be missing from this list whilst others may not be accurate. Please contact the helpdesk to raise any issues to help refine these citation trackings.
Lalande, M., Ménégoz, M., Krinner, G., Naegeli, K. & Wunderle, S. (2021) Climate change in the High Mountain Asia in CMIP6. Earth System Dynamics 12, 1061–1098. https://doi.org/10.5194/esd-12-1061-2021 https://doi.org/10.5194/esd-12-1061-2021 |
Wu, X., Naegeli, K., Premier, V., Marin, C., Ma, D., Wang, J. & Wunderle, S. (2021) Evaluation of snow extent time series derived from Advanced Very High Resolution Radiometer global area coverage data (1982–2018) in the Hindu Kush Himalayas. The Cryosphere 15, 4261–4279. https://doi.org/10.5194/tc-15-4261-2021 https://doi.org/10.5194/tc-15-4261-2021 |
Process overview
Instrument/Platform pairings
Advanced Very High Resolution Radiometer 2 (AVHRR/2) | Deployed on: NOAA-7 |
Advanced Very High Resolution Radiometer 2 (AVHRR/2) | Deployed on: NOAA-9 |
Advanced Very High Resolution Radiometer 2 (AVHRR/2) | Deployed on: NOAA-11 |
Advanced Very High Resolution Radiometer 2 (AVHRR/2) | Deployed on: NOAA-14 |
AVHRR-3 | Deployed on: NOAA-16 |
AVHRR-3 | Deployed on: NOAA-18 |
AVHRR-3 | Deployed on: NOAA-19 |
Computation Element: 1
Title | ESA Snow Climate Change Initiative: Derivation of SCFG AVHRR v1 product. |
Abstract | The retrieval method of the snow_cci SCFG product from AVHRR data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module. All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 630 nm and 1.61 µm (channel 3a or the reflective part of channel 3b), and an emissive band centred at about 10.8 µm. The snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFG retrieval method is applied. The following auxiliary data sets are used for product generation: i) ESA CCI Land Cover from 2000; water bodies and permanent snow and ice areas are masked based on this dataset. Both classes were separately aggregated to the pixel spacing of the SCF product. Water areas are masked if more than 50 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map; ii) Forest canopy transmissivity map; this layer is based on the tree cover classes of the ESA CCI Land Cover 2000 data set and the tree cover density map from Landsat data for the year 2000 (Hansen et al., Science, 2013, DOI: 10.1126/science.1244693). This layer is used to apply a forest canopy correction and estimate in forested areas the fractional snow cover on ground. |
Input Description | None |
Output Description | None |
Software Reference | None |
Output Description | None |
- units: percent
- standard_name: surface_snow_area_fraction
- long_name: Snow Cover Fraction on Ground
- var_id: scfg
- names: surface_snow_area_fraction, Snow Cover Fraction on Ground
- units: percent
- long_name: Unbiased Root Mean Square Error for Snow Cover Fraction on Ground
- standard_name: surface_snow_area_fraction standard_error
- var_id: scfg_unc
- names: Unbiased Root Mean Square Error for Snow Cover Fraction on Ground, surface_snow_area_fraction standard_error
- var_id: lat_bnds
- var_id: lon_bnds
- var_id: spatial_ref
Co-ordinate Variables
- units: degrees_north
- standard_name: latitude
- var_id: lat
- long_name: WGS84 latitude coordinates, center of pixel
- names: latitude, WGS84 latitude coordinates, center of pixel
- units: degrees_east
- standard_name: longitude
- var_id: lon
- long_name: WGS84 longitude coordinates, center of pixel
- names: longitude, WGS84 longitude coordinates, center of pixel
- long_name: time
- standard_name: time
- var_id: time
- names: time
Temporal Range
1995-08-01T00:00:00
2003-06-22T23:59:59
Geographic Extent
90.0000° |
||
-180.0000° |
180.0000° |
|
-90.0000° |